Milenco Security Handrail Fitting Guide

Table of Contents

1. Introduction and Compatibility
2. Fitting the 2066 / 5258 Security Handrail Step-by-Step

1. Introduction and Compatibility This guide provides fitting instructions for the 2066 / 5258 Security Handrail, designed to enhance safety and provide support when entering and exiting your caravan or motorhome.

2. Fitting the 2066 / 5258 Security Handrail Step-by-Step

1. Use the gasket to mark the drill positions on the wall, ensuring the proper spacing (350mm and 450mm).
2. Drill two sets of 4 holes (7mm diameter) in the marked positions.
3. Mount the two inside backing plates and insert 8 screws.
4. Fit the two gaskets and then tighten the 8x M6 screws to secure the handrail.
5. Fit the two trim cover plates (mounting cover W 90mm x H 105mm).

Please note: The Handrail Frame mounting kit must be purchased separately if needed.